Table of Contents
- 1 What is the density of WMM?
- 2 What is the CBR value of WMM?
- 3 What is difference between GSB and WMM?
- 4 What is full form of WMM?
- 5 What is the purpose of WMM?
- 6 What is the use of WMM?
- 7 What is the meaning of WMM?
- 8 Which is the correct formula for moisture content?
- 9 What is the moisture content of a mass solid?
- 10 How to calculate water content on wet basis?
What is the density of WMM?
GSB WMM Crushed Mix Stone Aggregate for Paths
|Bulk Density||1520 to 1680 Kg/ Cubic m|
|Usage/Application||Driveways, Paths, Borders, Landscaping, Ground Cover, RMC|
|Specific Gravity||2.4 to 3|
What is the CBR value of WMM?
Results show that incorporation of Ganga sand to replace 20% proportion of stone dust of conventional WMM mix was found to improve the CBR value from 121% for conventional mix to 169%. This was while the same level of replacement with moorum had decreased the CBR value of WMM mix to a value of 94%.
What material is WMM?
8. Materials used in the WBM are the stone aggregates, screenings and binder material(Stone dust with water) while in WMM material used are only stone aggregates and binders.
What is difference between GSB and WMM?
The prime work of GSB is drainage system and secondary to support the load transfer to the sub-grade. WMM is a part of designed road section, thickness arrived from design calculations to withstand design load and ultimate transfer to sub0grade.
What is full form of WMM?
WMM Full Form
|White Mountain Motorsports||Sports||WMM|
|World Magnetic Model||Military and Defence||WMM|
Why WMM is used?
The WMM roads are said to be more durable. The WMM roads get dry fast and can be opened for traffic within less time as compared to the WBM roads, which take about one month for getting dry. WMM roads are constructed at a faster rate. The consumption of the water is less in case of the WMM roads.
What is the purpose of WMM?
Wet Mix Macadam(WMM) work includes laying and compacting clean, crushed, graded aggregate and granular material, premixed with water, to a dense mass on a prepared GSB layer or existing pavement as per the requirement of the project.
What is the use of WMM?
The WMM roads are said to be more durable. The WMM roads get dry fast and can be opened for traffic within less time as compared to the WBM roads, which take about one month for getting dry. WMM roads are soon-ready to be blacktopped with the Bituminous layers. WMM roads are constructed at a faster rate.
What is WMM in civil engineering?
WBM(Water Bound Macadam) conventional method and WMM(Wet Mix Macadam) modern technology- are base course layers for Pavement/Road design. In case of WBM stone aggregates and binders are overlaid on one another at the time of construction.
What is the meaning of WMM?
October 20, 2005. WMM stands for Wi-Fi Multimedia. It is a standard created to define quality of service (QoS) in Wi-Fi networks. It is a precursor to the IEEE 802.11e WLAN QoS draft standard, which is meant to improve audio, video and voice applications transmitted over Wi-Fi.
Which is the correct formula for moisture content?
Moisture content is the amount of water present in a moist sample of a product like wood, soil or similar. Moisture content can be be expressed on wet or dry basis. Moisture content on dry basis is the mass of water to the mass of dry solid: MC d = m h2o / m d (1) where.
How is moisture content of a grain determined?
Moisture content calculations. Calculating moisture content from wet weight and dry weight. Moisture Content of grain is usually determined on wet basis (wb), scientists sometimes use dry basis (db): MC wb = Moisture content wet basis [%]
What is the moisture content of a mass solid?
Wet Moisture Calculator 1 Mass solid (kg, lb): 587 2 Moisture content – dry basis: 0.199 (19.9 %) 3 Moisture content – wet basis: 0.166 (16.6 %)
How to calculate water content on wet basis?
Water Content on Wet Basis. Water content on wet basis is the mass of water to the mass of water and mass of solid: MC w = m h2o / m w . = m h2o / m h2o + m d (2) where. MC w = moisture content on wet basis. m h2o = mass of water (kg, lb) m w = total mass of moist – or wet – sample – mass of solid and mass of water (kg,lb)