Table of Contents
What brake fluid do I use for my clutch?
Most vehicle’s require SAE J1703, US FMVSS or 116 DOT 3 brake fluid in the clutch master cylinder.
What kind of fluid goes in a motorcycle clutch?
The type of hydraulic fluid your clutch system requires is printed on the cap of your clutch master cylinder reservoir. If your bike requires brake fluid, we recommend Dot 4 or Dot 5.1 fluid with high boiling points.
What kind of fluid does a hydraulic clutch take?
Most hydraulically operated clutches use brake fluid for the hydraulic fluid. Brake fluid is hygroscopic and will attract moisture out of the air. Over time this moisture in the brake fluid will lead to corrosion inside the hydraulic system causing both the master cylinder AND clutch slave cylinder to wear.
What kind of oil does a Yamaha Warrior 350 take?
Oil Change Kit With Yamalube All Purpose 10W-40 for Yamaha WARRIOR 350 1998-2004 – Walmart.com.
Is DOT 4 clutch fluid?
Valvoline Brake & Clutch Fluid DOT 4 is high-quality, non-mineral fluid based on glycol ether, and is formulated specifically for hydraulic brake systems. The high boiling point of Brake & Clutch Fluid DOT 4 guarantees safe driving and means additionally that it is safe for all materials within the brake system.
Can you use DOT 4 brake fluid clutch?
Brake and Clutch Fluid DOT 4 is a high performance non-petroleum automotive brake fluid designed for conventional hydraulic brake and clutch systems.
Does a motorcycle have clutch fluid?
For my motorcycle, the same grade (DOT 4) and type (brake fluid) is used in brakes and clutch systems. The rear brake reservoir was located under a body panel on the right side of the bike (many will have it on the left handle bar). The clutch reservoir was located under a body panel on the left side of the bike.
Is dot4 clutch fluid?
Can I use ATF as clutch fluid?
Unlike brakes, clutch hydraulics do not see high temps, so boiling point is not an issue. ATF is specified for hydraulic duty, anti-corrosion, moderate temps, rubber seal compatible, universally available, cheap. Silicone fluid has some issues.
Is a Yamaha Warrior 350 fast?
A stock Yamaha Warrior 350 can reach speeds of up to 63 mph on even surfaces.
What spark plug does a Yamaha Warrior 350 take?
NGK Standard Sparkplug D8EA for Yamaha WARRIOR 350 1987-2000.
Can I use brake fluid for clutch?
Clutch fluid is really just brake fluid that is kept in the clutch master cylinder. The pressure of the fluid is then used to engage the clutch, which allows you to change gears.