How much is a serpentine belt for a 2004 Dodge Ram?

How much is a serpentine belt for a 2004 Dodge Ram?

2004 Dodge Ram 1500 Belt – from $27.99+ |

Can you tune a 5.9 Cummins?

Tuning. There are many options for all 5.9L common-rail Cummins engines. The most popular offerings are (by year): HP Tuners, MM3, and Smarty (2003 to 2005), EFILive (2006 to 2009), MM3, EFILive, and EZLynk (2010 to present).

How do you install a serpentine belt?

  1. Fan belt replacement: Check the tensioner first. Check for excessive movement.
  2. Check the pulley/roller. Rotate the tensioner and slide the drive belt off the pulley/roller.
  3. Measure wear with an app.
  4. The right tools make it a do-it-yourself project.
  5. Remove the belt with a serpentine belt tool.
  6. Place the new belt.

How can I make my 5.9 Cummins faster?

By feeding more fuel into this massively-compressed engine, it’s only natural that you can unlock more power. Though, you can still out-do the factory turbo by adding too much fuel. With the 5.9 Cummins, 50-hp or 75-hp injectors are about the maximum injector size with the factory turbo.

How do you change the serpentine belt on a 6.7 Cummins?

Let’s start replacing:

  1. Pop the hood.
  2. Release the tensioner from the A/C pulley.
  3. Remove the airbox.
  4. Release the tensioner (undo one bolt) and move it out of the path by rotating it clockwise.
  5. Pull out the old belt.
  6. Guide the new belt up each pulley as per the diagram, but make sure you leave the tensioner for last.

How does the serpentine belt on a Cummins work?

It connects to several pulleys and provides power to crucial systems like power steering, the water pump, air conditioning, and the alternator. The diagram shows the various pulleys all connected to the belt. Cummins parts have improved in design over the years and the serpentine belt is no exception.

What’s the correct way to change the serpentine belt?

Undo one bolt and release the tensioner. Rotate it clockwise to move it out of the path. At this point, you can remove the old belt. Use the diagram to guide the new belt over each pulley. Leave the tensioner for last. It’s important to remember that there’s only one correct way to put the serpentine belt on.

What kind of belt does a Dodge Ram use?

Since the Ram uses the serpentine belt to rotate the water pump, when the belt breaks you are forced to come to a stop. This article applies to the Dodge Ram (2002-2008). The serpentine belt is made of a rubber compound and is grooved for optimal friction with the accessory pulleys.

Why does my serpentine belt make a chirping noise?

However, the belt is still constructed of a relatively pliable material that rotates at high RPM every time you drive subjecting it to tremendous wear and tear. The main symptom of serpentine belt wear is squealing and chirping noises. This happens when the belt starts to slip.

Share this post