Table of Contents
Can you sand StarBoard?
The edge of StarBoard can be sanded with an orbital sander or hand sander to help smooth out a jagged edge. We DO NOT recommend sanding the surface of StarBoard! Finishing the edges of StarBoard with a router is easy and can be achieved by using a standard roundover bit.
What colors does StarBoard come in?
Marine STARBOARD/SEABOARD Colors Available:
- Polar White.
- Black.
- Craft Gray.
- Mercury Gray.
- Seafoam.
- Sand Shade.
Does silicone stick to StarBoard?
Silicone or any other reef safe adhesives that I am aware of will adhere to Starboard. It is meant to be mechanically fastened or welded.
Can you caulk starboard?
BoatLIFE® LifeCaulk® works well to replace old or worn caulking. Products like 3M’s 5200 work well as a water sealing caulk but will not adhere King StarBoard® to itself or other materials in a permanent bond. …
Will screws hold in starboard?
Starboard is slippery and can deform slightly so screws won’t hold well.
How much does StarBoard cost?
King Starboard Quick Overview Price List
| King Starboard Price List (Effective 11/01/1013) | ||
|---|---|---|
| Size (Thickness) | Sheet 54″x96″ (36 Sq. Ft.) | Half-Sheet 54″x48″ (18 Sq. Ft.) |
| 1/4″ | $150 | $86.00 |
| 3/8″ | $226.00 | $129.00 |
| 1/2″ | $301.00 | $172.00 |
Why is it called StarBoard?
Most sailors were right handed, so the steering oar was placed over or through the right side of the stern . Sailors began calling the right side the steering side, which soon became “starboard” by combining two Old English words: stéor (meaning “steer”) and bord (meaning “the side of a boat”).
How long does StarBoard last?
Starboard AS has a grippy dot pattern on one side that’s molded–not laminated–right into the polymer sheet, and will last the lifetime of your boat.
How do you clean a black StarBoard?
To clean everyday dirt and stains, use a cleaner such as Soft Scrub® and a nylon scrubby or stiff nylon brush. Scrub lightly; excess force can mar the finish. Persistent stains will usually go away if you soak the area with bleach (do not use 100% chlorine as used to treat swimming pools) and/or use a pressure washer.
Can you epoxy starboard?
You can glue starboard to anything with epoxy. The trick is to have a recessed area that can hold the epoxy on the starboard.
How do you seal King starboard?
It is preferable to mechanically fasten or weld King StarBoard®, but when an adhesive is necessary you can use a product called Chem-Set™ 6105 Polyolefin Bonder, Lord 7542-AB, or 3M’s Scotch-Weld DP-8005.